products

HOT PRODUCTS

  • Elliptical Oval finned tube
  • Longitudinal finned tube
  •  Low Finned Tubes

News

Location : home > News

CARBON STEEL PIPES

Posted on 2018/03/21
CARBON STEEL PIPES
Carbon steel pipe mainly refers to the carbon mass fraction is less than 2.11% without containing deliberately added alloying elements of steel. Sometimes referred to as general carbon steel or carbon steel. Carbon steel generally also contain a small amount of silicon, manganese, sulfur, phosphorus in addition to carbon.
Classification
Carbon steel pipe has different category according to various standard.
(1) according to end-use, it can be divided into carbon structural steel, carbon tool steel and easy cutting steel into three categories, carbon structural steel is divided into the project building structural steel and machinery manufacturing steel;
(2) accoring to smelting method, it can be divided into open-hearth steel, converter steel;
(3) accoring to the deoxidation method, it can be divided into the boiling steel (F), killed steel (Z), semi-killed steel (b), and special killed steel (TZ);
(4) accoring to the carbon content, it is divided into low-carbon steel (WC ≤ 0.25%), medium carbon steel (WC0.25% -0.6%) and high-carbon steel (WC> 0.6%);
(5) accoring to the quality of steel, it is divided into ordinary carbon steel (phosphorus, sulfur, higher), high-quality carbon steel (phosphorus, sulfur, low) and high quality steel (phosphorus, sulfur, lower ) and super high quality steel.
Application
Carbon steel pipe is the earliest to use the largest amount of basic material in modern industry. The worlds industrial countries, in efforts to increase high strength low alloy steel and alloy steel production, which is also very attention to improving the quality of carbon steel pipe and expanding the range of varieties and use. The proportion of carbon steel pipe production in the countries total output of steel, approximately maintained at about 80%, it is not only widely used in buildings, bridges, railways, vehicles, ships and all kinds of machinery manufacturing industry, but also in the modern petrochemical industry, marine development, has also been heavily used.
Seamless carbon steel pipe
Seamless carbon steel pipe is made by the perforation of the ingot or solid tube capillary, and then dial made by the hot-rolled, cold rolled or cold drawn. Seamless carbon steel pipe has an important position in Chinas steel industry. Seen from the caliber <φ76, accounting for 35% <φ159-650, accounting for 25%. From a variety of general purpose of the 1.9 million tons, accounting for 54%; oil pipe 760,000 tons, accounting for 5.7%; hydraulic prop, precision tube 15 million tons, accounting for 4.3%; stainless steel pipe, tube bearings, automotive tube for a total of 50 000 tons, accounting for 1.4%.

how to contact us?

links

Cangzhou Datang Steel Pipe Co., Ltd All Right Resevered.