ASTM A333 Grade 6 Pipe, A333 Seamless Pipe, ASTM A333 Gr6 Pipe,ASTM a333 gr6 steel pipe,ASTM A333 Grade 6 seamless pipe
ASTM A333 Grade 6 seamless pipes are applicated for low temperature service.
ASTM A333 Grade 6 is the part of standard covers wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. ASTM A333 Grade 6 alloy pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
Seamless and Welded Steel Pipe size for Low-Temperature Service:
Outer Dimensions: 19.05mm – 114.3mm
Wall Thickness: 2.0mm – 14 mm
Length: max 16000mm
Application: Seamless and Welded Steel Pipe for Low-Temperature Service.
Steel grade: ASTM A333 Grade 6
ASTM A333 Grade 6 Pipe, A333 Seamless Pipe, ASTM A333 Gr6 Pipe,ASTM a333 gr6 steel pipe,ASTM A333 Grade 6 seamless pipe
Packing:
Bare packing/bundle packing/crate packing/wooden protection at the both sides of tubes and suitably protected for sea-worthly delivery or as requested.
Inspection and Test: Chemical Composition Inspection, Mechanical Properties Test(Tensile Strength,Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test,No-destructive Test, Hydrostatic Test.
Surface treatment: Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.
Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.
ASTM A333 Grade 6 Pipe, A333 Seamless Pipe, ASTM A333 Gr6 Pipe,ASTM a333 gr6 steel pipe,ASTM A333 Grade 6 seamless pipe
ASTM A333 Grade 6 Chemical Compositions(%)
Compositions |
Data |
Carbon(max.) |
0.30 |
Manganese |
0.29-1.06 |
Phosphorus(max.) |
0.025 |
Sulfur(max.) |
0.025 |
Silicon |
… |
Nickel |
… |
Chromium |
… |
Other Elements |
… |
ASTM A333 Grade 6 Pipe, A333 Seamless Pipe, ASTM A333 Gr6 Pipe,ASTM a333 gr6 steel pipe,ASTM A333 Grade 6 seamless pipe
Mechanical properties for ASTM A333 Grade 6 Steel Pipe
Properties |
Data |
Tensile strength, min, (MPa) |
415 Mpa |
Yield strength, min, (MPa) |
240 Mpa |
Elongation, min, (%), L/T |
30/16.5 |
Impact requirements:
the notched-bar impact properties of each set of three impact specimens, when tested at temperature specified shall be not less than the values prescribed.